How To Edit Your Money On American Truck Simulator

Please be aware: Truck Simulators provide a very realistic experience. Still, using a Truck Simulator is NOT considered bodily driving experience.

The Beginners Guide To American Truck Simulator

What You Need To Get Started

• PC capable of Running American Truck Simulator
• Create a Steam Account and Install Steam*
• Purchase Digital or Physical copy of American Truck Simulator
• PS4 or XB1 Controller (Optional but recommended)

*Steam is the game distributor ATS uses.

PC Requirements

Minimum PC Requirements for American Truck Simulator: Operating System: Windows 7 64-bit Processor: Dual core CPU two.iv GHz Retention: 4 GB RAM Graphics: GeForce GTS 450-class (Intel Hard disk drive 4000) Storage: four GB available space

Recommended PC Requirements for American Truck Simulator (ATS): Operating System: Windows vii/eight.1/10 64-bit Processor: Quad core CPU iii.0 GHz Memory: half-dozen GB RAM Graphics: GeForce GTX 760-class (2 GB) Storage: 4 GB available space

ATS requires a somewhat decent PC. Lower terminate PC's can still run ATS, but you will have to lower the graphics settings until it is playable.

Getting Started

In one case you find out if your PC can can fifty-fifty run American Truck Simulator, you can purchase it now.

I recommend creating a Steam business relationship and purchasing ATS through Steam. Y'all can also purchase a Physical re-create of American Truck Simulator. Yous will nonetheless need to create a Steam account to admission the game and new maps and trucks. Later creating an account, y'all need to install Steam to your PC. Steam is what ATS is launched from.

One time yous accept purchased ATS and installed Steam on your PC, open Steam then find and click 'Library'.

On the left side you should see American Truck Simulator, if you have already purchased information technology. If you lot need to buy ATS, click Store and search for American Truck Simulator. Y'all can likewise run into the Downloadable Content (DLCs), such as States, trucks and pigment jobs.

I highly recommend using a PS4 controller to drive. Otherwise, y'all will be using your keyboard to drive. I started playing with simply a keyboard before I finally figured out how to get my PS4 controller to work on Steam. Once I figured it out, it was a whole different experience to the game. More on that later.

Buy a PS4 Controller on Amazon

Create an American Truck Simulator Contour and Alter Your Settings

At present, it is going to become a piddling bit complicated. You need to open ATS and figure out all of your settings before driving.

I am going to encompass everything you need to know.

Open up American Truck Simulator by clicking the green Play push button in Steam.

After ATS has loaded up, create a new profile.

If you purchased any other DLCs, open up the DLC browser and make certain they are all activated.

When information technology asks you to do the Setup Wizard, click the 'Skip wizard' push on the bottom right. We volition get to that very soon.

Choose what urban center and state you want to start in. Yous can start anywhere you lot similar.

After this, y'all volition be asked to skip the training or non. Choose one and so striking 'Esc' on your keyboard to pause the game. When you lot hit pause, hit the 'Options' tab on the card at the bottom.

You will then encounter the Options Menu. I am going to go through each of these and post screenshots of all my settings.

Graphics Settings

Depending on your PC, your graphic settings may exist completely different from mine.

The images below show the best settings that residual out performance and quality.

Be sure to keep High dynamic range (HDR) and Depth of field (DOF) turned ON.

If your game is however lagging when turning all the graphic settings downwards, your PC may not be able to run ATS. I recommend researching your exact PC and searching why it is lagging. (EX: 'Acer Nitro 5 lagging while gaming'). My PC has a way high performance mode I must turn on with my laptop plugged in or my CPU volition overheat and it will lag. Information technology could be something simple like that for your PC likewise.

Audio Settings

You can decide what you want to turn upwardly or down.

Turn that annoying music off past turning off 'UI music book'.

Gameplay Settings

You tin modify the Gameplay settings to make the game feel more realistic.

My recommended settings are in the images below.

You tin can apparently alter whatever you desire, only this is what I recommend playing on.

ATS Gameplay Settings Tips:

• Turn on Traffic Offense if you like.
• Manual Blazon may depend on what yous play on (Keyboard, Controller, Steering Wheel). I like using Sequential because I tin can manually change the gears using a controller. You could change it to Real Automatic as well which is exactly what it sounds similar.
• If you turn OFF Automated engine and Electricity start, yous will have to hit the start button twice. In newer trucks, you accept to turn the key on for almost x seconds and let the lights become off on the dash. This is the figurer doing tests before startup. Once the check engine lights are off, you tin can start the truck. Turning this option off works like that. Information technology is basically turning the ignition on and when y'all hit the start push button again, it volition crank the engine. Don't panic because your truck won't start in ATS, you just have to hit the engine start push again.

Best American Truck Simulator Keyboard Binds for PS4 Controller

These are my settings I use and highly recommend for ATS. I pair these key binds to buttons on my PS4 Controller through Steam.

Before moving on to the Controls tab, we need to become your PS4 Controller set on Steam to work on ATS.

(Steam is compatible with the new PS5 controller and all Xbox controllers as well.)

Setting up Controller on Steam for American Truck Simulator

Exit out of ATS or hit Shift + Tab and and then striking the Windows cardinal to get to your desktop.

Open Steam and click the 'Big Picture show Mode' button at the tiptop correct. This will open a new window for BPM.

Click the Gear icon on the elevation right.

Click Controller Settings.

Once you get here, Turn PlayStation or Xbox Configuration Support ON depending on your controller. Brand sure your controller is plugged into your computer using a USB cable. After information technology is plugged in, your controller will pop up at the bottom stating it was detected.

About done!

Now that your controller is 100% connected to Steam, you lot can exit Large Pic Mode by clicking the 'Power' push on the top and clicking 'Go out Big Picture'.

We need to utilise my controller configuration to your controller. I accept tried many different configurations for my controller and I have institute this is the best one in that location is.

Click the link below to automatically add together my controller configuration to your controller:

steam://controllerconfig/270880/1527361755

When it asks, click 'Open Steam Client Bootstrapper'.

This will automatically open up Steam, open the Controller Configuration page, and information technology volition preview my controller configuration on your controller. All y'all have to exercise is click 'Apply Configuration' at the bottom.

To go dorsum to the Controller Configuration page, go to your Steam Library by clicking 'Library' at the top. Click American Truck Simulator on the left and and so clicking the 3 dots on the right, to find 'Controller Configuration'.

You will see what buttons are for what fundamental bind.

Be sure y'all inverse all your key binds in the ATS in-game options to what I showed higher up. Not doing so will make your controller buttons and binds non work properly. Yous tin ever alter your binds also to anything you like. I highly recommend using exactly what I utilize.

You lot must know these Binds to get started.

Throttle – R2

Brake – L2

Shift Up – R1

Shift Downwardly – L1

Get-go Truck – Triangle

Parking Brakes – Square

Engine Brake – Circle

Interior Expect Right – Right Joystick right

Interior Look Left – Right Joystick left

Left Joystick controls steering bicycle left and right

Escape (Bill of fare) – Start

Map – Right Joystick Click

There is only one last pace before you lot tin finally start driving on American Truck Simulator.

Controls Settings

Open American Truck Simulator, click your profile, click 'Options' and so click 'Controls'. Change your controls to what y'all see in the image below. Make sure the meridian one says keyboard + (Your Controller). Make sure Controller subtype is on Gamepad, joystick. If yous desire to drive an automatic truck, instead of "Sequential", modify it to "Existent Automatic".

For the Steering axis, click where it says 'Joy X Axis'. The cursor should disappear.

Now, use the left joystick on your controller and get left to right. A yellow bar should pop upwardly showing the sensitivity when using the joystick.

For the Acceleration Axis, gear up 'Acceleration centrality mode' to Centered or Normal, click 'Joy RT' and so push button R2 on your controller. It should work the same way. You may have to adjust the 'Dispatch axis deadzone'. You desire information technology to commencement moving as soon every bit you start pushing R2. It should exist set with how hard you lot push R2 downward. So, if you barely push button R2 down, your truck rpm should slightly ascent in game.

Brake Axis works the same exact way as acceleration axis. Set it, click Joy LT, and arrange if needed.

After you accept change and figure out all of your settings, you can drive now.

Click the 'Drive' push button at the main menu and try to bulldoze the truck. You will start out doing a training task then you volition be able to discover other jobs in the Freight Market. You lot have to piece of work your way upwards to be able to purchase and drive your own truck and trailer. Yous could download a mod in the Workshop that helps you get money and xp faster, simply I practise non recommend doing that. Just piece of work your way upwardly.

That is how to get American Truck Simulator fix with a PS4 controller. It is really non that hard to get set up and information technology is a very helpful Simulator.

---

Just imagine how realistic driving a truck is with a steering bicycle, pedals and a shifter that has a range and a splitter. They actually make everything and information technology works with American Truck Simulator. I personally do not take that kind of setup still, but I will go ane in the near future and I am pretty certain on what setup I am going to get.

I plan on getting the G29 Racing Cycle with the Pedals and Shifter, a shifter knob and a correspond everything.

---

For now, here are some tips to get you started driving on American Truck Simulator:

• If you are in Sequential manner, try to up-shift around 1350 – 1500 RPM, depending on the transmission.
• Downshift when you get to about 1000 – 1100 RPM.
• In my opinion, the Allison TC10 10 speed transmission works best with Sequential because at that place is no major delay when shifting. With whatsoever other manual, I would rather have it ready to automatic. Most new trucks have 12 speed automatics.
• Don't leave the Jake brake on at all times. Plow information technology on when yous demand it.
• Take a central bind for Zoom Interior Camera. It zooms your view in when pressed so you tin can read gauges on dash easier.
• If y'all have whatsoever problems with the game, do a Google search for exactly what yous demand help with.
• Press f4 to suit your mirrors and seat position. (See Right)I similar my mirrors gear up like in the image below. I like my seat fix where I can meet my total mirror, hood mirrors and gauges. I can look to the right for my passenger side mirror.
• Press f2 to activate screen mirrors. Yous tin accept i, both or none. I personally like none showing unless I am backing I will ordinarily plough on my passenger side one.
• Printing f5 & f6 to use the route advisor. This is your GPS, shows you how many miles are left, how much time until you have to park, how much weight you lot are hauling, and more. I drive with this choice off. I apply my trucks GPS. You can change the truck GPS by setting a key bind for "Dashboard Map Mode". If you use my settings, that button is 'Alt'.
• Press I to change the dash menu items.

Using the image below, let me indicate out the dash gauges.

Starting from the Top Left going down, middle, then Top Correct going down:

1. Coolant Temperature
2. Diesel Exhaust Fluid (DEF) Level
3. Fuel Level
4. Tachometer (RPMs)
5. Speedometer
6. Oil Pressure Gauge (PSI)
7. Primary Air Tank Pressure
8. Secondary Air Tank Pressure

Yous can see what gear you are in, inside that white gear on the screen. The greenish symbol ways the engine brake is on. At that place are vii dissimilar brands of trucks on ATS and each one is different. The image above is the adept ole Peterbilt 579.

If yous are using my fundamental binds and/or my controller configuration with a PS4 controller, you can use the Touchpad as well.

Clicking the Touchpad on the left side will plow your windshield wipers on.

Clicking the Touchpad on the right side acts as the Enter button. Hold it down to fuel instead of property the Enter fundamental.

Tapping the Touchpad on the left side is the engine brake decrease.

Borer the Touchpad on the right side is the engine restriction increase. There are 3 levels to the engine brake. 1, ii and three. Level 1 is the weakest and Level iii is the strongest.

Conclusion

Quick Summary of everything yous learned/did:

• If your PC is capable of running ATS and you purchased ATS.
• Created a Steam account.
• Opened ATS and inverse all your settings, matching my settings.
• Changed your controller configuration to my configuration.
• Learned the basics of driving on ATS with a controller.

I take explained everything you will need to know to get started on American Truck Simulator. Be certain to bookmark this folio if you need to and come back to it. You can contact me likewise if y'all need any assist, but I strongly suggest only searching on Google. Information technology volition exist a LOT faster than waiting on me to reply. Be sure to bank check out my other guides and stay tuned for the bankroll guides.

Source: https://learn2truck.com/ats-guide/

Posted by: blackmoningeng.blogspot.com

Share this post